Fan Mode on AC? – What, When, and Where?

adminall postsLeave a Comment

fan mode on ac

Fan mode on AC is simply a setting on your air conditioner that keeps the blower fan running regardless of whether the cool air is on or not.

There are pros and cons for leaving it on.

One application for running the fan on the air conditioner continuously is the ability to keep the temperature even throughout the house even when the cooling is off.

Another application is the use of induct air purification. indoor air purifiers are installed directly into the plenum and ductwork of your central heat and air system. They require the AC fan mode to be left on continuously.

AC Fan Mode-  Should AC fan be on auto or on?

Being that the AC he is one of the biggest energy hogs in the home, running the AC on auto, is usually the best choice because it keeps the utility bill down.

There are several reasons for this.

For one it takes extra energy to run the fan all the time, which means more power consumption.

Two, keeping the fan on continuously when the AC is not running evaporates the moisture that is normally condensed, and sends it back through the system.
The result is higher humidity inside of the house, which means that the AC has to work extra hard when it kicks on to counteract the effect of the humidity.

Running AC fan only

Running the AC fan alone without the air conditioner is a good way of evening out the temperature throughout a house but since the ductwork is typically in the Attic, it more than often means that you’re blowing hot air through the vents since the attic is the hottest room in the house and that’s starting point for the air that is getting moved through the system.
So using the blower fan on an AC does not equate to using a regular fan.

but if you are using some type of air purification module inside of your ductwork then running the AC fan only is a perfectly good way of getting a whole house effect of an air purifier.

Should the fan be on when the AC is on?

Yes. The fan on your AC will blow when the unit is set to cool. The fan is what helps distribute the cool air evenly throughout the house. Once the temperature inside the house reaches the desired input that you put into your thermostat, the cool air will stop. And depending on whether your AC fan is on auto or on, the fan will either turn off with the AC or keep running. Auto 4 automatically shutting off when the air conditioner shuts off and “fan on” to keep the fan running when the air conditioner turns off.

Does running the fan on my air conditioner reduce humidity?

Running the fan on an air conditioner without the cool air turned on can actually have the opposite effect a reducing humidity.
Leaving the fan running when the AC is not running is a sure way to increase the moisture in the air because any moisture in the system will evaporate and distribute back through your house.
Humidity is actually reduced more when the AC is running on cool. And if your AC has a dry mode, it will leave in reduce humidity further.

Does leaving the AC fan on waste electricity?

Though the AC fan has a couple of good points work keeping the temperature even throughout the house when the AC is not on, it does tend to be a waste of electricity otherwise.
Some systems with built-in air purification systems must have the fan on continuously to keep the air purifiers working efficiently. Sometimes you just can’t get out of paying.

Does fan mode bring in outside air?

Air conditioners rarely bring in air from the outside even when they’re on fan mode. The supply side of the air conditioner is inside the house.

That is one of the primary reasons that air conditioning is known to be a source of indoor air pollution. Because the same air is being distributed through the system and throughout the house.
If the air inside your AC is dirty, then the air inside your house is unhealthy to.

Why does the fan keep running on my air conditioner?

The easiest things to check when your AC fan won’t stop running is whether or not the mode is set on Auto or On. If it is on on, there you have it. Super easy fix.

Another easy check is the HVAC filters. If they get to dirty, then the air can’t flow through the system properly and the system will continue to run trying to reach the desired temperature set on the thermostat.

AC filters are a good place to start when the unit isn’t cooling right too.
There is no telling how much money has been spent on technicians only to find out the filters are clogged.

Those are the easy fixes.

If it is not one of those, then the problem is probably a little worse.
It could be a relay or the thermostat.
Those are fixes usually left to the professionals.

Summary

ac fan modeWhat does the fan setting on an air conditioner do?

The fan setting on an air conditioner gives you the ability to run the fan continuously or to have it go on and off automatically when the AC is cooling.

The auto fan mode is generally a little cheaper to run because it doesn’t use the extra power to keep it running all the time.
But there are times when using the fan without the AC cooling is needed.

An example is using in duct air purifiers in your ductwork. In order for the air purifiers to be efficient, the fan on your AC needs to run all the time.

But running the fan on the AC is not the same as using a regular oscillating tower fan.

It will not do much to cool a room since the air that it is moving in most homes come from the attic. and not from outside which is a common belief.

The Attic is the hottest area in the house so any are originating from there he was going to be warmer. Not a bad ideal in the winter.

 

Leave a Reply

Your email address will not be published. Required fields are marked *