Braeburn Thermostat Programming Instructions

adminAir Conditioning, All Posts, Heating, Household Helps

braeburn thermostat

Braeburn systems is a company based in Montgomery Illinois. Their product line includes thermostats, humidistats, and zone dampers.
They have a full line of thermostats that include programmable, non-programmable, and smart Wi-Fi, including wireless and touch screen.

Braeburn programmable thermostats allow you to schedule when your heat and air are running. A feature that will save you money by turning your air off while you’re out of the house or sleeping.

Braeburn Thermostat  Instructions

Set Up

1. Date/time

Locate the dates last time button on the keypad. Using the up and down arrows, change the hour, then the minutes, then the day of the week. Save each selection by tapping the day/time button afterwards.

2. Set the Fan

Scroll through the fan settings by pushing the “Fan” button repeatedly till you find the setting you want.

“Auto” runs the fan only when the unit is running.
The ” On” setting keeps the fan on continuously.
The ” Circ” setting runs the fan for 24 minutes and off for 24 minutes continually.
“Prog” is the setting that you program the thermostat to run the fan on.

Confused about which one to pick?
See this resource.

3. Set the differential

This is the setting that allows you to choose how much the temperature in the room changes before the air conditioner or heater comes back on.

To set it, hold the return button for 4 seconds. Pick what you want your differential to be by scrolling up or down. Some models have two and three different stage differentials that can be set using the same procedure as well.

Programming your thermostat

1. Enter the programming mode by pressing the” Prog” button.

2. Choose “Heat” or “Cool”.
Some models have a switch that you simply move into position, others require you to make your choice by pushing the “system” on the touch screen.

3. Day/time

On this step you can either choose to program one day at a time or a full week. Simply press the day/time button to choose one or the other.

4. Hours/ minutes

This is the hours and minutes of the day that you want the heat and air to run.
Hit the up and down arrows to scroll up or down to find your desired times.

5. Unoccupied

The “Unocc” mode is the program your thermostat for when the house will be unoccupied. To find this mode, simply press the “Prog” button.

6. Unoccupied mode is programmed the same way as the other settings. Use the up and down arrows till you find your desired days and times.

7. When you’re finished, press return to complete.

Congratulations you have finished programming your Braeburn thermostat!
braeburn thermostat programming instructions